NetSetMan Support

Marduk

Member

From: Houston, TX

Registered: 2011-08-22

Posts: 7

IPV6 Error with 3.4.0 & 3.4.1

When trying to change to a connection using IPV6 NetSetMan just seems to freeze as indicated below in the log.   This is only if I enable the IPv6 IP setting (setting DNS only seems not to cause an issue and I don't set the gateway).   Tried both manual and automatic.   When trying manual, I also noticed that I can no longer type a ":" in when setting an IPV6 address (for example:  fec0::1) in any of the text boxes (IP, Gateway, DNS) on the IPV6 configuration screen, instead I have to set the IPV6 address I want then import the current setting

Finally, I tried changing the settings to use WMI IP activation, and while that does not throw an error, the IPV6 settings don't change either.

----------- BEGIN LOG ---------------

[0:00] Start: HAL [WiFi] (10:35:43)

[0:00] Start: Local Area Connection
[0:00] Adapter found
[0:00] Adapter Status: Start
[0:00] Adapter Status: Deactivate
[0:00] Adapter Status: OK
[0:00] Adapter Status: Finish

[0:00] Start: Wireless Network Connection
[0:00] Adapter found
[0:00] Script (Before): Start
[0:00] Script (Before): C:\Program Files (x86)\NetSetMan Pro\Scripts\Additional Settings - Halliburtion.vbs
[0:00] Script (Before): OK
[0:00] IP & Subnet Mask: Start
[0:00] DHCP: OK
[0:00] Gateway & Metric: Start
[0:00] Gateway: OK
[0:00] Metric: OK
[0:01] DNS: Start
[0:01] DNS: OK
[0:03] Wait: 5 sec
[0:08] Adapter - Refresh: OK
[0:08] Printer: Start
[0:08] Printer: OK
[0:08] Browser/Proxy: Start
[0:08] IE: OK
[0:08] FF Home page: http://www.bing.com
[0:08] FF Proxy: Done
[0:08] FF: OK
[0:08] Adapter Status: Start
[0:08] Adapter Status: Activate
[0:09] Adapter Status: OK
[0:09] Adapter Status: Finish

[0:09] Start: Bluetooth Network Connection
[0:09] Adapter found
[0:09] IP & Subnet Mask: Start
[0:09] DHCP: OK
[0:09] Gateway & Metric: Start
[0:09] Gateway: OK
[0:09] Metric: OK
[0:09] DNS: Start
[0:09] DNS: OK
[0:11] Wait: 5 sec
[0:16] Adapter - Refresh: OK
[0:16] IPv6: Start
[0:16] IPv6-IP

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,874

Re: IPV6 Error with 3.4.0 & 3.4.1

I'll check on the IPv6 settings in the next few days. In case I can find the problem I'll include a fix in the next version (together with some other fixes that are required as well). Thanks for reporting the problem.

Marduk

Member

From: Houston, TX

Registered: 2011-08-22

Posts: 7

Re: IPV6 Error with 3.4.0 & 3.4.1

Thanks.   Is it possible to get a copy of 3.3.0 in the meantime as without being able to change IPV6 addresses, 3.4.x is not going to work for me?

I deleted it after 3.4.0 installed successfully...

Last edited by Marduk (2012-03-31 02:18)

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,874

Re: IPV6 Error with 3.4.0 & 3.4.1

Version 3.3.0 is here:
www.netsetman.com/dl/netsetman_330.exe

Before removing the latest version please verify and provide some information:
- Which Windows version do you use?
- What do you mean by "I can no longer type a ":" in" - Nothing changed in the IPv6 interface. Are you sure you're typing it in the correct dialog? A screenshot or screenrecording (Wink) might help.

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,874

Re: IPV6 Error with 3.4.0 & 3.4.1

Could you please try this beta version and tell me if that fixed your problem? Thanks.
www.netsetman.com/dl/netsetman_3415_beta.exe

Marduk

Member

From: Houston, TX

Registered: 2011-08-22

Posts: 7

Re: IPV6 Error with 3.4.0 & 3.4.1

Thanks.    I tried the Beta.  The IPV6 switching, which was the real problem with no workaround, now works as in the past in the 3.4.1.5 Beta

On the other hand, I don't recall the ":" ever working in previous versions.  In the past I would set the IPV6 address manually then use the "copy from current settings" button to get it in.  Perfectly fine workaround, but I would still like the ability to enter an address manually.   In the latest beta, this still does not work.  I think I just noticed it again while playing with IPV6 issues.

BTW, How do I upgrade the Beta or the 3.3 version to Pro (I'm a registered pro user) as I can't access many of my profiles on what appears to be standard versions in the links above?

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,874

Re: IPV6 Error with 3.4.0 & 3.4.1

The new version will be released this week. Then you can use the IPv6 feature officially again.

Concerning the ":": To be honest, I think there is some kind of     misunderstanding in the usage of the feature. I don't see how the colon can make any problems in the entry fields. Would you mind showing me some screenshots or even better a screen recording (egain Wink is a free tol to do that). I think only this way I'll be able to see and understand the problem of the usage. Thanks.

How to upgrade to Pro: Simply follow the instruction in your license email. After you downloaded the Pro version from your account you can run the setup and choose to update the currently installed version. Then you'll be working with the Pro version.

Tylorsmith_2023

New Member

Registered: 2023-05-05

Posts: 1

Re: IPV6 Error with 3.4.0 & 3.4.1

I have got rid of the problem by resetting IPv6 and Winsock.