NetSetMan Support

scotty6996

Member

Registered: 2024-08-24

Posts: 3

Unable to change profile/IP address with Intel BE200 Wifi card

Good day!
I've been using NetSetMon for over six months to change local IP addresses (One IP uses one ISP, another uses the other) and once configured, worked wonderful. I had an Intel AX211 Wifi card.
Once I've upgraded to a BE200 Wifi Card PCI\VEN_8086&DEV_272B&SUBSYS_00F48086&REV_1A (I have the latest driver installed) there's been problems.
I've tried selecting the dynamic Wifi or the Intel card, no change.

If I do a profile/IP change, I get "Network adapter not found" - but if I do retry, the program believes it works, but the IP address isn't updated/changed now until I restart the PC.

Let me know what other information I can provide to help troubleshoot this.

Last edited by scotty6996 (2024-08-24 22:18)

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,878

Re: Unable to change profile/IP address with Intel BE200 Wifi card

Please provide screenshots (of the profile configuration and the activation dialog) as well as the activation log (open it at the bottom of the activation dialog).

Also please open the Adapter Details tab in Tools, click the run button, open the correct adapter and take a screenshot of the complete settings as well as the collapsed other adapters, so we get an overview over your adapters constellation.

scotty6996

Member

Registered: 2024-08-24

Posts: 3

Re: Unable to change profile/IP address with Intel BE200 Wifi card

I'm having difficulty figuring out how to get screenshots posted in this forum. Everything says I cannot post links.

scotty6996

Member

Registered: 2024-08-24

Posts: 3

Re: Unable to change profile/IP address with Intel BE200 Wifi card

I think this worked

[0:00] NetSetMan 5.3.2
           Non-Commercial Freeware Version

[0:00] Start: Verizon (2024-08-24 19:03:16)

[0:00] Start: Wi-Fi
[0:00] Adapter found
[0:00] IP: Start
           192.168.1.40 : 255.255.255.0
[0:00] IP Address: OK
[0:00] Subnet Mask: OK
[0:00] IP: OK
[0:00] Gateway: Start
           192.168.1.1
[0:00] Gateway: OK
[0:00] DNS: Start
           192.168.1.1
[0:00] DNS: OK
[0:00] Adapter - Refresh: Skip
           This setting is already set on this system.
           Since the same settings are already set on this system, this step is skipped.

[0:00] Finish (19:03:16)
[0:00] NetSetMan 5.3.2
           Non-Commercial Freeware Version

[0:00] Start: DHCP (2024-08-24 19:03:39)

[0:00] Start: Wi-Fi
[0:00] Adapter found
[0:00] IP: Start
           DHCP
[0:00] IP: OK
[0:00] Gateway: Start
           DHCP
[0:00] Gateway: OK
[0:00] DNS: Start
           DHCP
[0:00] DNS: OK
[0:00] Adapter - Refresh: Skip
           This setting is already set on this system.
           Since the same settings are already set on this system, this step is skipped.
           If you want to force DHCP reconfiguration, set the Network Adapter Status in your profile to [Restart].

[0:00] Finish (19:03:39)
[0:00] NetSetMan 5.3.2
           Non-Commercial Freeware Version

[0:00] Start: DSL (2024-08-24 19:03:47)

[0:00] Start: Wi-Fi
[0:00] Adapter found
[0:00] IP: Start
           192.168.1.181 : 255.255.255.0
[0:00] IP Address: OK
[0:00] Subnet Mask: OK
[0:00] IP: OK
[0:00] Gateway: Start
           192.168.1.1
[0:00] Gateway: OK
[0:00] DNS: Start
           192.168.1.1
[0:00] DNS: OK
[0:00] Adapter - Refresh...
[0:02] Adapter - Refresh: Error -12
           Network adapter not found

[0:02] Finish (19:03:50)

Last edited by scotty6996 (2024-08-25 00:04)