Routing Tables are not applied / Bug Reports / NetSetMan Support

NetSetMan Support

Search for already answered questions about NetSetMan (Pro) or ask new ones

You are not logged in.

Pages: 1

#1 2021-03-11 16:35

-JustMe-
Member
Registered: 2017-02-14
Posts: 10

Routing Tables are not applied

I've a profile which needs to have routing tables for private IP's set
10.0.0.0 mask 255.0.0.0 Gateway 10.10.10.1

I've configured this in advanced TCP-IP Settings section in NetsetMan-Pro.
In GUI I see Routeing-table activation, but when I check the result afterwards using route print, the routes are not there.

If I configure this as a script to be run after Profile activation with elevated rights
"route add 10.0.0.0 mask 255.0.0.0 10.10.10.1"
it works.

Is this a misunderstanding of the functionality from my side or a bug of the software?

Offline

#2 2021-03-11 16:50

NetSetMan Support
Administrator
Registered: 2005-08-06
Posts: 1,878

Re: Routing Tables are not applied

Please provide the basic details, like the version you are using and the activation log.

Online

#3 2021-03-16 11:22

-JustMe-
Member
Registered: 2017-02-14
Posts: 10

Re: Routing Tables are not applied

I'm running current version 5.0.5

Not working:
Erweiterte TCP/IP-Einstellungen - Routentabelle
I see settings being applied, but they are not in OS afterwards. Route print does not show them.

Working:
Scripte & Programme - Danach
route add 10.0.0.0    mask 255.0.0.0   10.128.2.254
Option: Mit erhöhten Rechten ausführen aktiviert.
Route print shows setting being active.

Offline

#4 2021-03-16 13:16

NetSetMan Support
Administrator
Registered: 2005-08-06
Posts: 1,878

Re: Routing Tables are not applied

Please provide the activation log as already requested.
You can find it at the bottom of the activation dialog.

Online

#5 2021-03-23 08:04

-JustMe-
Member
Registered: 2017-02-14
Posts: 10

Re: Routing Tables are not applied

Here's the log - using routing tables (Routingtabelle)

[0:00] NetSetMan Pro 5.0.5
[0:00] Start: Bonn (2021-03-23 08:01:52)

[0:00] Start: Ethernet
[0:00] Adapter gefunden
[0:00] IP: Start
           10.128.3.201 : 255.255.252.0
[0:00] IP-Adresse: OK
[0:00] Subnetzmaske: OK
[0:00] IP: OK
[0:00] Gateway: Start
           -
[0:00] Gateway: OK
[0:00] DNS: Start
           10.128.2.17
           172.16.208.11
[0:00] DNS: OK
[0:00] Schnittstellenmetrik: Start
           Auto
[0:00] Schnittstellenmetrik: OK
[0:00] Adapter - Aktualisieren...
[0:02] Warten auf Netzwerk...
[0:02] Adapter - Aktualisieren: OK
[0:02] Adapter-Status: Start
           Aktivieren
[0:02] Adapter-Status: OK
[0:02] Routentabelle: Start
           + 10.0.0.0 255.0.0.0 10.128.2.254/1
           + 172.16.0.0 255.240.0.0 10.128.2.254/1
           + 192.168.0.0 255.255.0.0 10.128.2.254/500
[0:02] route add 10.0.0.0 mask 255.0.0.0 10.128.2.254 metric 1
[0:02] OK!
[0:02] route add 172.16.0.0 mask 255.240.0.0 10.128.2.254 metric 1
[0:03] OK!
[0:03] route add 192.168.0.0 mask 255.255.0.0 10.128.2.254 metric 500
[0:03] OK!
[0:03] Routentabelle: OK
[0:03] System-Einstellungen: Start
[0:03] Windows Update: Start
           Aktivieren
[0:03] Windows Update: OK

[0:03] Start: WLAN
[0:03] Adapter gefunden
[0:03] IP: Start
           192.168.2.201 : 255.255.255.0
[0:03] IP-Adresse: OK
[0:03] Subnetzmaske: OK
[0:03] IP: OK
[0:03] Gateway: Start
           192.168.2.1
[0:03] Gateway: OK
[0:03] DNS: Start
           -
[0:03] DNS: OK
[0:03] Schnittstellenmetrik: Start
           Auto
[0:03] Schnittstellenmetrik: OK
[0:03] Adapter - Aktualisieren...
[0:06] Warten auf Netzwerk...
[0:06] Adapter - Aktualisieren: OK
[0:06] Adapter-Status: Start
           Aktivieren
[0:06] Adapter-Status: OK
[0:06] WLAN: Start
           ap4Mobile
[0:06] Warten auf Netzwerk (E5023) - Wiederholen: 1
[0:07] Warten auf Netzwerk (E5023) - Wiederholen: 2
[0:08] Warten auf Netzwerk (E5023) - Wiederholen: 3
[0:12] WLAN: OK

[0:12] Ende (08:02:04)

Offline

#6 2021-03-23 08:05

-JustMe-
Member
Registered: 2017-02-14
Posts: 10

Re: Routing Tables are not applied

Routing tables are not added.

Offline

#7 2021-03-23 08:21

-JustMe-
Member
Registered: 2017-02-14
Posts: 10

Re: Routing Tables are not applied

Log with using Script exdecution

[0:00] NetSetMan Pro 5.0.5
[0:00] Start: Bonn (2021-03-23 08:18:39)

[0:00] Start: Ethernet
[0:00] Adapter gefunden
[0:00] IP: Start
           10.128.3.201 : 255.255.252.0
[0:00] IP-Adresse: OK
[0:00] Subnetzmaske: OK
[0:00] IP: OK
[0:00] Gateway: Start
           -
[0:00] Gateway: OK
[0:00] DNS: Start
           10.128.2.17
           172.16.208.11
[0:00] DNS: OK
[0:00] Schnittstellenmetrik: Start
           Auto
[0:00] Schnittstellenmetrik: OK
[0:00] Adapter - Aktualisieren...
[0:02] Warten auf Netzwerk...
[0:02] Adapter - Aktualisieren: OK
[0:02] Adapter-Status: Start
           Aktivieren
[0:02] Adapter-Status: OK
[0:02] System-Einstellungen: Start
[0:02] Windows Update: Start
           Aktivieren
[0:03] Windows Update: OK

[0:03] Start: WLAN
[0:03] Adapter gefunden
[0:03] IP: Start
           192.168.2.201 : 255.255.255.0
[0:03] IP-Adresse: OK
[0:03] Subnetzmaske: OK
[0:03] IP: OK
[0:03] Gateway: Start
           192.168.2.1
[0:03] Gateway: OK
[0:03] DNS: Start
           -
[0:03] DNS: OK
[0:03] Schnittstellenmetrik: Start
           Auto
[0:03] Schnittstellenmetrik: OK
[0:03] Adapter - Aktualisieren...
[0:07] Warten auf Netzwerk...
[0:07] Adapter - Aktualisieren: OK
[0:07] Adapter-Status: Start
           Aktivieren
[0:07] Adapter-Status: OK
[0:07] WLAN: Start
           ap4Mobile
[0:07] Warten auf Netzwerk (E5023) - Wiederholen: 1
[0:08] Warten auf Netzwerk (E5023) - Wiederholen: 2
[0:09] Warten auf Netzwerk (E5023) - Wiederholen: 3
[0:12] WLAN: OK
[0:12] Warte: 3 s
[0:16] Skript (Danach): Start
           StaticRoutesBonn.cmd
[0:16] Skript (Danach): Warte
[0:16] Skript (Danach): OK
[0:17] Ende (08:18:57)

Offline

#8 2021-03-23 08:23

-JustMe-
Member
Registered: 2017-02-14
Posts: 10

Re: Routing Tables are not applied

With script execution Routes are added successfully.

Offline

#9 2021-03-23 08:27

-JustMe-
Member
Registered: 2017-02-14
Posts: 10

Re: Routing Tables are not applied

Image from script added
Script.jpg

Offline

#10 2021-03-25 19:56

NetSetMan Support
Administrator
Registered: 2005-08-06
Posts: 1,878

Re: Routing Tables are not applied

We tried to reproduce your the described problem with the exact same route table settings, but "unfortunately" it worked as expected.

Here's the starting point on one of our test systems:

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0    192.168.199.2  192.168.199.131     25
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    331
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    331
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    331
      169.254.0.0      255.255.0.0         On-link     169.254.136.0    276
    169.254.136.0  255.255.255.255         On-link     169.254.136.0    276
  169.254.255.255  255.255.255.255         On-link     169.254.136.0    276
    192.168.199.0    255.255.255.0         On-link   192.168.199.131    281
  192.168.199.131  255.255.255.255         On-link   192.168.199.131    281
  192.168.199.255  255.255.255.255         On-link   192.168.199.131    281
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    331
        224.0.0.0        240.0.0.0         On-link   192.168.199.131    281
        224.0.0.0        240.0.0.0         On-link     169.254.136.0    276
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    331
  255.255.255.255  255.255.255.255         On-link   192.168.199.131    281
  255.255.255.255  255.255.255.255         On-link     169.254.136.0    276
===========================================================================

Based on your logs, we configured these settings:
routetable.png

This is the activation log:

[0:00] Route Table: Start
           + 10.0.0.0 255.0.0.0 10.128.2.254/1
           + 172.16.0.0 255.240.0.0 10.128.2.254/1
           + 192.168.0.0 255.255.0.0 10.128.2.254/500
[0:00] route add 10.0.0.0 mask 255.0.0.0 10.128.2.254 metric 1
[0:00] OK!
[0:00] route add 172.16.0.0 mask 255.240.0.0 10.128.2.254 metric 1
[0:00] OK!
[0:00] route add 192.168.0.0 mask 255.255.0.0 10.128.2.254 metric 500
[0:01] OK!
[0:01] Route Table: OK

This is the result. Notice the added lines 2, 9 and 10:

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0    192.168.199.2  192.168.199.131     25
         10.0.0.0        255.0.0.0     10.128.2.254  192.168.199.131     26
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    331
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    331
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    331
      169.254.0.0      255.255.0.0         On-link     169.254.136.0    276
    169.254.136.0  255.255.255.255         On-link     169.254.136.0    276
  169.254.255.255  255.255.255.255         On-link     169.254.136.0    276
       172.16.0.0      255.240.0.0     10.128.2.254  192.168.199.131     26
      192.168.0.0      255.255.0.0     10.128.2.254  192.168.199.131    525
    192.168.199.0    255.255.255.0         On-link   192.168.199.131    281
  192.168.199.131  255.255.255.255         On-link   192.168.199.131    281
  192.168.199.255  255.255.255.255         On-link   192.168.199.131    281
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    331
        224.0.0.0        240.0.0.0         On-link   192.168.199.131    281
        224.0.0.0        240.0.0.0         On-link     169.254.136.0    276
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    331
  255.255.255.255  255.255.255.255         On-link   192.168.199.131    281
  255.255.255.255  255.255.255.255         On-link     169.254.136.0    276
===========================================================================

We also would like to point out one thing:
For the routing functionality, we are not using any special API, but simply the command lines that are displayed in the activation log:
"route add 10.0.0.0 mask 255.0.0.0 10.128.2.254 metric 1"
And the next line is streamed from the command line result directly into the activation log:
"OK!"
If there as a problem with that command, there would be some error instead of "OK!".

In your activation log we can see the "OK!" results as well, so they must be successful.
As far as we know, the routing table is the same for all users, so there cannot be any account mixup either.

We are simply out of ideas why this might be failing in your case.
Could you please create a detailed screencapture video showing the whole process from start to finish and where you check for the results? Maybe that way we will notice some important detail that is currently missing.

Also please try to break this problem down. Create a profile with just the Route settings without any other settings. See if this makes any difference. Maybe one of the following settings is resetting the configuration or something like this.

Online

Pages: 1