NetSetMan Support

srg39

Member

Registered: 2014-10-29

Posts: 1

Vanishing WiFi Profiles: Error 70000009

Hi,

I'm using NSM (v3.7.3) on Win7. I have two wireless networks and I would like to set up  two separate WiFi profiles so that I can switch my wireless network adapter between the two. Each time I try to add a new WiFi profile, the other entry in the box vanishes (on the NSM WiFi Management screen). Then the next time I try to switch between the two networks, I get an error.

I've tried the 'New', and 'Import' buttons to see if there was any way I could add two WiFi profiles to the list but regardless of how I try, I can only seem to have one.

The log output is below:

[0:00] Start: Home (16:08:23)

[0:00] Start: Wireless Network Connection
[0:00] Adapter found
[0:00] IP & Subnet Mask: Start
[0:00] DHCP: OK
[0:00] Gateway & Metric: Start
[0:00] Gateway: OK
[0:00] Metric: OK
[0:00] DNS: Start
[0:00] DNS: OK
[0:02] Wait: 5 sec
[0:07] Adapter - Refresh: OK
[0:07] WiFi: Start
[0:08] Connect: SKY7E359
[0:08] ConnectToNetworkByMAC: Error 70000009
The network adapter did not respond. Please make sure it's turned on and working correctly.
www.netsetman.com/index.php?s=help&hf=en#hf_wifi
[0:08] WiFi (SKY7E359): Error 70000009
The network adapter did not respond. Please make sure it's turned on and working correctly.
www.netsetman.com/index.php?s=help&hf=en#hf_wifi
[0:08] WiFi: Finish
[0:08] Connection: Start
[0:08] Connection: Finish
[0:08] Firewall: Start
[0:08] Firewall: Activate
[0:08] Firewall: OK
[0:08] Firewall: Finish

[0:08] Finish (16:08:32)

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,878

Re: Vanishing WiFi Profiles: Error 70000009

profiles so that I can switch my wireless network adapter between the two. Each time I try to add a new WiFi profile, the other entry in the box vanishes

I'm afraid I didn't understand that part. Could you please show some screenshots to visualize the problem?
The activation problem has probably the same reason, so let's try to solve the first issue first.
Did you have a look at the link in the log? It points to the help file WiFi section describing some basic requirements for your WiFi adapter.