Error changing adapter status.

KostasTz · 2011-06-23 14:12

I have notice that whenever the option "Adapter Status" is checked and selections is "Deactivate" or "Restart" I have the following error message.

[0:06] Start: WLAN
[0:06] Adapter found
[0:11] Adapter - Refresh: Error
[0:11] Adapter Status: One or more essential parameters not specified
The syntax supplied for this command is not valid. Check help for the correct syntax.

Usage set interface [name = ] IfName
[ [admin = ] ENABLED|DISABLED
[connect = ] CONNECTED|DISCONNECTED
[newname = ] NewName ]

Sets interface parameters.

IfName - the name of the interface
admin - whether the interface should be enabled (non-LAN only).
connect - whether to connect the interface (non-LAN only).
newname - new name for the interface (LAN only).

Notes:
- At least one option other than the name must be specified.
- If connect = CONNECTED is specified, then the interface
is automatically enabled even if the admin = DISABLED
option is specified.
One or more essential parameters not specified
The syntax supplied for this command is not valid. Check help for the correct syntax.

Usage set interface [name = ] IfName
[ [admin = ] ENABLED|DISABLED
[connect = ] CONNECTED|DISCONNECTED
[newname = ] NewName ]

Sets interface parameters.

IfName - the name of the interface
admin - whether the interface should be enabled (non-LAN only).
connect - whether to connect the interface (non-LAN only).
newname - new name for the interface (LAN only).

Notes:
- At least one option other than the name must be specified.
- If connect = CONNECTED is specified, then the interface
is automatically enabled even if the admin = DISABLED
option is specified.

[0:11] Finish (14:59:51)

NetSetMan Support · 2011-06-23 14:15

What's your Windows version? 32/64bit?

KostasTz · 2011-06-23 14:17

Hi,
I use the NetSetMan free version with Windows XP, 32 bit.

NetSetMan Support · 2011-06-23 14:40

Strangly the 64-bit version of the function is used. Are you sure you don't have the 64-bit version of XP? You can look that up by opening the system dialog (in NetSetMan main menu click "Tools > Windows System". If it's a 64-bit version it will stated there ("64-Bit Edition").

Are you using the latest NetSetMan version 3.2.5?

If it's really 32-bit and you have the latest NSM version: May I send you a debugging version for testing that has a more detailed output that might help finding the source of the problem?

KostasTz · 2011-06-23 15:12

Yes, I have Windows XP, SP3 v 2002 32 bit. It is not mentioning 64bit edition. I have the latest version of NSM 3.2.5 (released at 2011-06-06) since I downloaded yesterday.

My laptop has a AMD 64bit x2 proccesor.

Please send me the debugging version and tell me what to do.

NetSetMan Support · 2011-06-27 23:29

Sorry for the delay. I'll send you the version probably on thursday.

avaviney · 2011-11-01 01:42

Fixed this. Thanks.

KostasTz · 2011-11-01 13:27

Hi, what has been fixed?
Does a new version released?

NetSetMan Support · 2011-11-01 16:47

I don't know why "avaviney" posted this. Actually the account looks much like a spam account. Spam registrations have drastically increased in the last weeks...

But concerning your problem: version 3.2.6 fixing your problem has been release already a couple of months ago. Use the update notification in NSM, the RSS feed, the newsletter or facebook be notified about new updates.

NetSetMan Support

#1 2011-06-23 14:12

Error changing adapter status.

#2 2011-06-23 14:15

Re: Error changing adapter status.

#3 2011-06-23 14:17

Re: Error changing adapter status.

#4 2011-06-23 14:40

Re: Error changing adapter status.

#5 2011-06-23 15:12

Re: Error changing adapter status.

#6 2011-06-27 23:29

Re: Error changing adapter status.

#7 2011-11-01 01:42

Re: Error changing adapter status.

#8 2011-11-01 13:27

Re: Error changing adapter status.

#9 2011-11-01 16:47

Re: Error changing adapter status.