NetSetMan Support

mauro1068

Member

Registered: 2010-02-04

Posts: 3

Cannot connect network units in W7x64

Hi,

I've installed netsetman pro on my new pc with W7x64. All seems to work fine, with exception of network units.

When the program try to connect network units it remain undefinitelly, without giving any reply or error.

Any suggest?

thanks
Mauro

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,878

Re: Cannot connect network units in W7x64

Sorry, I think I missed your posting.
I'm not sure what feature you are writing about - what are "network units"?

In any case, please have a look at the log (click the "+" at the bottom of the activation window) to see some more details. Maybe the problem is stated there.

mauro1068

Member

Registered: 2010-02-04

Posts: 3

Re: Cannot connect network units in W7x64

Hi,

here is the log:

[0:00] Start: Complastex (11:39:33)

[0:00] Start: Connessione alla rete locale (LAN)
[0:00] Adapter found
[0:00] IP & Gateway: Start
[0:00] DHCP già attivo su questa interfaccia.
[0:00] IP (DHCP-NS): OK
[0:01] Gateway: OK
[0:01] PC Name: Start
[0:01] PC Name: OK
[0:01] Printer: Start
[0:01] Printer: OK
[0:01] Net Drive: Start

and stay indefinitely.
I make some test changing settings in "Map Network Drive" page, but with no results.

As that I'm no a supervisor user, I tried logging in as supervisor, but again nothing happen.

The same configuration worked fine with WXP

I Hope You can help me... at the momen I cannot use your tool...

Mauro

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,878

Re: Cannot connect network units in W7x64

Do you have the NSM Service installed? If yes, please try deactivating (or uninstalling) it and then try to activate your profile again. I need to know where the source for the problem might be.

mauro1068

Member

Registered: 2010-02-04

Posts: 3

Re: Cannot connect network units in W7x64

Hi,

no NSM service installed.

NetSetMan Support

Administrator

Registered: 2005-08-06

Posts: 1,878

Re: Cannot connect network units in W7x64

Well, to be honest, I'm a bit clueless why this happens.
If you're trying to map a network drive that isn't available at the moment then this halt might be cause by the delay of Windows while trying to access this network resource. This delay is usualy set to one minute.

If you however are sure that this network resource is accessable at that moment, then the problem might be somewhere else.

Please check if your Net Drive configuration was set correctly.

And if nothing helps, then you could use the script feature instead of the built in Net Drive feature.

To map a network drive using a script, i.e. the command line, use the following syntaxt in a *.bat file:

net use x: \\computername\folder

where x is a free local drive letter.